Are there any undocumented commands for InfiniiVision X-series oscilloscopes?

Frequently Asked Questions (FAQs)SummarySome programming commands are not listed in the documentation because they have not been extensively tested and/or most users will not need them. Some of these commands are listed here, with no guarantee they will work as expected or remain available in future firmware revisions.QuestionAre there any undocumented commands for InfiniiVision X-series oscilloscopes?AnswerThe following list of undocumented commands is provided as-is and without official support.  Some commands may not work on some InfiniiVision X-series models. Disable or re-enable the [Auto Scale] front panel button :AUToscale DISable :AUToscale ENABle Disable or re-enable automatic measurements :MEASure:ENABle 1 :MEASure:ENABle 0 Emulate a front panel button push :SYST:PROD:KEY is a 2-digit integer representing the button to be "pushed".  The button numbers map to buttons differently for different InfiniiVision series.  The following list is an example for the 3000A and 3000T X-series models.  For other series, use this list along with trial and error to find the right value to use in your command sequence.   Command3000A button push3000T button push:SYST:PROD:KEY 00softkey 1softkey 1:SYST:PROD:KEY 01softkey 2softkey 2:SYST:PROD:KEY 02softkey 3softkey 3:SYST:PROD:KEY 03softkey 4softkey 4:SYST:PROD:KEY 04softkey 5softkey 5:SYST:PROD:KEY 05softkey 6softkey 6:SYST:PROD:KEY 06channel 1channel 1:SYST:PROD:KEY 07channel 2channel 2:SYST:PROD:KEY 08channel 3channel 3:SYST:PROD:KEY 09channel 4channel 4:SYST:PROD:KEY 10DigitalDigital:SYST:PROD:KEY 11Label(locks out front panel):SYST:PROD:KEY 12AutoscaleAutoscale:SYST:PROD:KEY 13Save/Recall(locks out front panel):SYST:PROD:KEY 14MathMath:SYST:PROD:KEY 15PrintPrint:SYST:PROD:KEY 16UtilityUtility:SYST:PROD:KEY 17CursorsCursors:SYST:PROD:KEY 18MeasureMeasure:SYST:PROD:KEY 19TriggerTrigger:SYST:PROD:KEY 20Force TriggerForce Trigger:SYST:PROD:KEY 21AcquireAcquire:SYST:PROD:KEY 22DisplayDisplay:SYST:PROD:KEY 23Run/StopRun/Stop:SYST:PROD:KEY 24Mode/CouplingMode/Coupling:SYST:PROD:KEY 25SingleSingle:SYST:PROD:KEY 26HorizontalHorizontal:SYST:PROD:KEY 27SearchSearch:SYST:PROD:KEY 28ZoomZoom:SYST:PROD:KEY 29NavigateNavigate:SYST:PROD:KEY 30Navigate leftNavigate left:SYST:PROD:KEY 31Navigate stopNavigate stop:SYST:PROD:KEY 32Navigate rightNavigate right:SYST:PROD:KEY 33Default SetupDefault Setup:SYST:PROD:KEY 34IntensityIntensity:SYST:PROD:KEY 35Quick ActionQuick Action:SYST:PROD:KEY 36WaveGenWaveGen:SYST:PROD:KEY 37AnalyzeWaveGen 2 (no hardware):SYST:PROD:KEY 38SerialAnalyze:SYST:PROD:KEY 39RefSerial:SYST:PROD:KEY 40HelpRef:SYST:PROD:KEY 41Clear DisplayHelp:SYST:PROD:KEY 42BackClear Display:SYST:PROD:KEY 43softkey 1Back:SYST:PROD:KEY 44push ch1 offset knobZone:SYST:PROD:KEY 45push ch2 offset knobFFT:SYST:PROD:KEY 46push ch3 offset knobTouch:SYST:PROD:KEY 47push ch4 offset knobJitter (not supported):SYST:PROD:KEY 48push ch1 V/div knobpush Select knob:SYST:PROD:KEY 49push ch2 V/div knobpush ch1 offset knob:SYST:PROD:KEY 50push ch3 V/div knobpush ch2 offset knob:SYST:PROD:KEY 51push ch4 V/div knobpush ch3 offset knob:SYST:PROD:KEY 52push Trigger knobpush ch4 offset knob:SYST:PROD:KEY 53push Cursors knobpush ch1 V/div knob:SYST:PROD:KEY 54 push ch2 V/div knob:SYST:PROD:KEY 55push Time/div knobpush ch3 V/div knob:SYST:PROD:KEY 56push Select knobpush ch4 V/div knob:SYST:PROD:KEY 57push multiplex knob (scaling)push Trigger knob:SYST:PROD:KEY 58push multiplex knob (offset)push Cursors knob:SYST:PROD:KEY 59  :SYST:PROD:KEY 60 push Time/div knob:SYST:PROD:KEY 61  :SYST:PROD:KEY 62 push multiplex knob (scaling):SYST:PROD:KEY 63 push multiplex knob (offset)