BenchLink Scope: Transferring Waveforms to the Keysight 33120A

First, capture the waveform using Keysight BenchLink Scope:1. Capture the waveform from the oscilloscope using the 'Waveform - New' command.2. There are two ways to save data for transferring:Use the 'Waveform - Save as Time, Amplitude' command and save as a *.csv or *.prn file.Copy the data to the clipboard using 'Edit - Copy Data' and then 'select the channel'.NOTE:Second, transfer the captured waveform to the Keysight 33120A using Keysight BenchLink Arb:1. Depending on which method you used to save the data (see above):Open or import the file with the .csv or .prn file extension.Use 'Edit - Paste' to place the data from the clipboard into the application.2. Select 'I/O - Send Waveform'.Notes:.csv:comma-separated time and corresponding amplitude values for each data point..prn:tab-separated time and corresponding amplitude values for each data point.Revision 1.0 30 Nov 98 dah