Can I Run the Keysight 84000 System from a Remote Computer?

Yes, to run the system remotely:1. Allow the RFIC workstation to display windows on your workstation. Type: xhost + 2. Start a remote sessiona. Type: telnet < RFIC_workstation_name > or rlogin < RFIC_workstation_name > b. Enter login name and password as requested. c. At the prompt, type: export DISPLAY=:0.03. Check PATH variable on the RFIC workstation:a. Type: echo $PATHb. If /opt/hp84000/bin is NOT in the path, type: export PATH=$PATH:/opt/hp8400/bin c. You can make this change permanent by adding the following line to the user's .profile file: PATH=$PATH:.:/opt/hp84000/bin4. Start the software either in hardware, or no-hardware mode as explained below:a. To start the HP 84000 test software in no-hardware mode, type: hp84000_ui -h &b. To start the HP 84000 test software in hardware mode, type: hp84000_ui &After a moment, the RFIC program's Main menu should appear. If using RFIC software prior to release A.03.00, make sure no more than 5 users are logged in at any one time!