Can I Use BenchLink Waveform Editor with EDU33210A Series Smart Bench Essentials Waveform and Function Generators?

Frequently Asked Questions (FAQs)SummaryThis article tells you what you can do to load a waveform into EDU33210A Series Smart Bench Essentials Waveform and Function GeneratorsQuestionCan I Use BenchLink Waveform Editor with EDU33210A Series Smart Bench Essentials Waveform and Function Generators?AnswerIt is not possible to launch BenchLink Waveform Editor from Pathwave BenchVue when using EDU33211A because EDU series is not supported with BenchLink Waveform Editor for direct PC connection.   What you can do is saving your arb waveform into a USB stick drive and loading it into the instrument from the front panel. You can use BenchLink to generate the waveform you want and then save the arb waveform into a USB stick (preferably a Sandisk USB that has been fully tested). You cannot connect EDU33211A to PC to load the waveform directly from BenchLink to the instrument. Note: The EDU33210 Series supports USB flash drives with the following specification: USB 2.0, FAT32 format, up to 32 GB. We recommend using a SanDisk Cruzer Blade flash drive for the front panel USB port.