3048A: Problems with Running Option 301

Check all of the following issues:1. The ONLY supported IB card is the 82335A/B. Some customers have had success with other cards, including some from National Instruments, however, these are not supported by Keysight.2. The software will only run on an IBM® compatible PC/ XT/ AT 286/ 386/ 486/ Pentium.3. The operating system must be MS-DOS® 3.3 or greater. IT CANNOT be run in any Windows® (or other GUI) environments.4. The computer must have 640k total conventional memory.5. GRAFPLUS software (non-Hewlett-Packard) is required to printout the data plots. IB printers are not supported.6. Revision A.01.01 was the last released version of software.7. The PC must be dedicated to the phase noise application software and be running with minimal AUTOEXEC.BAT and CONFIG.SYS files.