Serial bus decoding and protocol analysis - over 30 decoders as standard PicoScope can decode 1-Wire, ARINC 429, BroadR-Reach (100BASE-T1), CAN & CAN FD, CAN J1939, CAN XL, DALI, DCC, DMX512, Ethernet 10Base-T and Ethernet 100Base-TX,  FlexRay, I²C, I²S, I3C, LIN, Manchester, MIL-STD-1553, Modbus (ASCII/RTU), Parallel Bus, PMBus, PS/2, Quadrature, SENT Fast/Slow, SMBus, SBS Data, SPI-MISO/MOSI, SDI-SDIO, UART (RS-232 / RS-422 / RS-485), USB and Wind Sensor protocol data as standard, with more protocols in development, and available in the future with free-of-charge software upgrades. Graph format shows the decoded data (in hex, binary, decimal, or ASCII) in a data bus timing format, beneath the waveform on a common time axis, with error frames marked in red. These frames can be zoomed in to investigate noise or signal integrity issues. Table format shows a list of the decoded frames, including the data and all flags and identifiers. You can set up filtering conditions to display only the frames you are interested in or search for frames with specified properties. The statistics option reveals more detail about the physical layer such as frame times and voltage levels. PicoScope can also import a spreadsheet to decode the data into user-defined text strings. More information on Serial bus decoding and protocol analysis - overview >>